Installing the filter was simple. Balancing my stacked washer dryer was hard. The filter has been working great!

I think reducing plastic in our waterways and oceans is very important. Having used the system for over a year now I’ve had no problems with it (provided I remember to change the filter, which only happened once 🙂).

Good cause and well made product.

Love the easy filter changing. The housing unit plate that sticks to the washer side likes to drop off when the load is off balance. Ended up mount to the wall.

with us also the adhesive strip came off immediately. We screwed it to the wall but that´s not an option for everyone, so I think the mounting kit needs to be improved. The strip from version 1.0 was a lot bigger and lasted until the upgrade.
Our first cartridge lasted for 20 washes, which is way more than version 1.0.! However, the bypass didn´t activate, so we changed the setting and now we have to wait.
I love the bypass option because most of our loads are natural fibres and now the cartridges last a lot longer which makes it a lot cheaper!

I am using this filter at home. We are having around 6 washing cycles a week (9kg load) and it just works perfectly!

Easy to install, easy tu use and easy to replace the cartridge.

What else can you wish for?

Thanks for this great product, I would recommend it without hesitation.

Washing machine filters should be standard on any washing machine, in my opinion, but were impossible to source, so I was very happy to get my hands on this filter. Extremely simple and easy to set-up and strongly built.
I recommend mounting it to the wall with screws as the adhesive strip started to peel off the side of the washing machine, under the weight of the water-filled filter.

I love that this product is a pretty color (like the sea) & that the cartridges are not just recyclable but that your U.S. partner will take care of that for me. But your installation instruction video left 2 very key aspects out: connecting the hose to the unit,and attaching the unit to the bracket using the small holder piece. Fortunatey, those were covered in the written instructions when I scrolled down. But it still feels like the video was a bit misleading in how super easy it makes installation look.

Brilliant concept, should be mandatory on every washing machine. I had Version 1 and sometimes when the filter was at the end of life the washing machine could not pump out the water as the resistance of the filter was too much, but now is everything corrected with Version 2, where there is an automatic filter disengagement and a manual regulator to fine tune it according to washing machine. Keep on with the good work!

Hatten auch schon die erste Version und den Zähler kaum verwendet….diese Version ist noch anwenderfreundlicher, toll !

A very good idea for the planet and for hour own house. Nice to see, easy to use.

I am very happy with the Version 2, as a long year user of the first version, I can tell, all the disadvantages of the first version are solved! Be part of the movement against plastic!

I’ve had the product for a few months now and all works well.

We really appreciate the thoughtfulness and the rigorous research that went into this product. It operates as expected, and it has an appealing look in the laundry closet. Our only concern was wanting to have it mounted closer to the washing machine. We had to mount it further away, because our laundry closet was made with a tight space around the machine. Despite that, this PlanetCare product operates as expected -- which means it takes water from the machine's drainage hose, and filters said water, and then expels said water to the designated exit point of our home. Water simply flows through hoses and through filtration unit as designed by the engineers. Thank you!!

I have previously used a filter from Filtrol which was large and hard to accomodate in my small laundry.
I started by using the self adhesive strip supplied with the unit to mount it on the machine. It didn't inspire confidence but it was convenient. Sure enough, 2 weeks latter the force developed during discharge blasted the unit off the side of the washer and it hit the tile floor and started leaking. I contacted customer service and the immediately sent out the replacement of the piece that was damaged N/C.
I have mounted the unit on the adjacent wall with screws. I am still over all chilled with the compact nature of this unit not to mention the customer service! I was contemplating putting the Filtrol unit in an adjacent cabinet but it would have been awkward at best with the 1" tubing leading in and out. A GREAT FIND.